Pleated blouse in wool flannel from 1970’s Gunne Sax pattern
After some significant design amendments, made a cropped blouse in micro-houndstooth wool flannel. Lessons learnt.
TOTAL TIME COMMITMENT: 19 hours including toile
Toile (without buttons, lining, interior seam finishing, basting stitch removal or hemming) and pattern amends: 7 hours
Cut out & transfer all pattern markings: 1.5 hours
Main construction: 8.5 hours
Lining construction: none
Finishings (buttons, hem): 2 hours
Fabric type
Wool flannel
Fabric weight
estimate 170gsm
VERDICT & LESSONS LEARNT
Size 11 Junior is an excellent starting size for me – I had to make hardly any adjustments to the neck, chest & shoulder (the usual places I need to adjust). The only thing I needed to do was lower the bottom of the armhole, and shorten the bodice by 1 inch. This pattern already had plenty of room at the bust due to the pleats, and plenty of room at the bicep because of the full sleeve. Had this been more fitted in those areas, doubtless I could have also had to do a full bust and fuller bicep adjustment, but the fit across the back, shoulders and chest is particularly nice.
I also adjusted the placement of the stitching across the pleats, raising them up to be more flattering on my petite frame, and also so that they were not so close to the bust area which caused the fabric to pouch out over my full bust, making me look disproportionately large there.
BUTTON HOLES NEED TO BE VERTICAL ON BLOUSES EXCEPT AT THE COLLAR!! I did them horizontally on this, and they extend beyond the edge of the placket, which I will have to live with, but feel a bit daft since they really should be vertical. It did also occur to me that if a blouse pattern has a defined placket, this determines the max size of button I can use.
Also, I need to remember that my choice of interfacing for anywhere there is going to be buttonholes, is really important. I need to choose a facing that will blend in effortlessly when the buttonholes are cut. I used a white interfacing on this, but because it is a darker fashion fabric, you can see little tufts of white where I have cut for the buttonholes. Not a disaster, but would have been so much better to have used a black interfacing.
This is the heaviest fabric I could use for this design I think, and as a matter of fact, it could look much much better on me in a super lightweight fabric like cotton batiste or crepe-de-chine. Made up, wearing it feels a tiny bit like wearing a jacket, so nice and substantial, but I think I would prefer it in a lighter weight fabric. This fabric would be better suited to a trouser or skirt I think.
I learnt a lot about proportioning a loose fit blouse on my petite frame – when there is quite a bit of extra fabric across the front, I need to be very careful and really, these look best on me as cropped blouses, as I ended up doing with this pattern.
Very pleased to find a use for the decorative stitching, but I didn’t do this in a contrasting thread, so it can hardly be seen on the finished blouse.
VARIATION IDEAS FOR ANOTHER MAKE
Make it in a much more lightweight fabric, perhaps sheer as in the sewing pattern photo.
Make the collar, button placket and cuff with a decorative scalloped edge (pattern pieces drafted)
Or make the collar and cuff inserting a piping or lace trim in a contrast colour to define the edge – this will work beautifully well if the main blouse is made in a plain fabric
Travel itineraries for Autumnwear
Puff-sleeve midi dress in khaki green linen-cotton twill from 1970’s pattern
Fourth make with this pattern, following several refinements on fit and pattern instructions.
TOTAL TIME COMMITMENT: 20 hours
Toile (without zip, lining, interior seam finishing, basting stitch removal or hemming): none
Cut out & transfer all pattern markings: 3 hours
Main construction: 11 hours
Lining construction, attachment and hemming: none
Finishings (hem, enclose zip): 2.5 hours
Applying studs: 2.5 hours
Fabric type
Cotton-linen twill
Fabric weight
estimate 250-300gsm
ADDITIONAL SEAM FINISHING, CONSTRUCTION NOTES & EXTRAS
Overlock each edge of skirt pattern piece before construction, press open
Overlock raw edges together at gathered tier seam
Overlock raw edges separately before construction on zip seam
Attach bodice facing to rest of garment using stitch-in-the-ditch
VERDICT & LESSONS LEARNT
For a centred zip, I must not sew the whole thing around in one continuous line - this is what made the top of the zip and the seam go out of alignment
Travel itineraries for Autumnwear
High-waisted trousers in smooth serge wool twill
Working with a 1970’s Vogue Basic Design pattern, details on total make time, adjustments, seam finishes, and lessons learnt.
TOTAL TIME COMMITMENT: 9.5 hours, no toile (note these trousers are unlined)
Toile (without zip, buttons, lining, interior seam finishing, basting stitch removal or hemming): none
Cut out & transfer all pattern markings (both main fabric and lining): 1.5 hours
Main construction: 6.5 hours
Lining construction: none
Finishings (buttons, hem): 1.5 hours
PATTERN CHANGES
Increased zip length to 8” (for easier clearance over my hips)
SEAM FINISHING & DECORATIVE EXTRAS
Edgestitching at pocket opening
2 ½” hem, made using blind hem
Leg and crotch seams – overlock separately
Pocket bags – overlock together
VERDICT & LESSONS LEARNT
I need to be more careful and choosy about trousers with tucks:
- just because they fit at the waist, they may not be the best fit at the hips. The tucks need to have more room and ease to ‘billow’ over the hips and not cling. I have drafted a pattern with an extra 2 ½” at the hips
- when making a garment with these pleats/tucks, it may be better to fit them to have the waist band sit very slightly below my natural waist, to avoid the tucks ‘poofing’ over my stomach
This weight of wool, I am henceforth going to refer to a ‘trench weight’ wool. It is fine for use on some trousers and skirts, though better application would be a trench coat or a jacket. Its smooth and lovely to wear though, and I don’t find these trousers miss a lining.
VARIATION IDEAS FOR ANOTHER MAKE
Make in a very fluid fabric, such as a viscose crepe or viscose jacquard – should work really well with the pleats at the front, and especially if I lower the waist a teeny bit to sit just below my natural waist
Other 1970’s Sewing projects
A square neck pinafore dress in grey wool from 1970’s Style 1169 pattern
Journal on making a midi dress with a ruffle tier, suitable for an autumn pinafore. Made in light grey wool from a 1970’s pattern.
TOTAL TIME COMMITMENT: 18.5 hours
Cut out & transfer all pattern markings: 3 hours
Main construction: 12 hours
Lining construction, attachment and hemming: none
Finishings (hem, enclose zip): 3.5 hours
SEAM FINISHING & DECORATIVE EXTRAS
Vertical interior seams – french seam
Raw edges on zip seam – overlock each side separately
Raw edges at gathered seam - overlock
Attach bodice facing to rest of garment – stitch-in-the-ditch
VERDICT & LESSONS LEARNT
This dress pattern is equally suitable to lined or unlined.
Choosing the correct construction technique for the hem is important – I used overlocking with a blind hemstitch but upon wearing, I am finding my boot hardware (since that is how I wear it) is catching the loose threads and pulling them. I need to redo the hem with a better technique where this will not happen.
VARIATION IDEAS FOR ANOTHER MAKE
Make a puffball tier at the bottom, rather than a simple gathered tier. The fabric might need interlining with silk organza to maintain the structure of the puffball.
Make in a fine denim, with some embroidery.
Other 1970’s Sewing Projects
High-waisted trousers in sage green twill from a 1970’s Vogue 1275 pattern
Journal of my total make time, lessons learnt and pattern adjustments.
TOTAL TIME COMMITMENT: 9 hours
Toile (without zip, buttons, lining, interior seam finishing, basting stitch removal or hemming): none
Cut out & transfer all pattern markings (both main fabric and interlining): 1 hour
Main construction: 6 hours
Lining construction: none
Finishings (hem): 2 hours
PATTERN CHANGES
Added a little extra flare from the hip down to the hem
Cut the waistband so that the gap and zip is located in the centre back rather than centre front
Add a cuff at the trouser hem
Removed pockets
SEAM FINISHING & DECORATIVE EXTRAS
Outside leg seams – overlock together
Inside leg seams – overlock together
Crotch – overlock each side separately
VERDICT & LESSONS LEARNT
These are great! Turning the waistband around, removing the pockets and adding more flare has made a big enough difference to the finished result that it feels like a very different pair of trousers from my caramel linens.
The cotton twill is a great application for this kind of garment – there is some drape in this fabric so it feels soft and moves nicely, but it also has some structure which adds drama to the flare and is handy in a trouser. I also absolutely had no need to line them.
They also felt very quick and easy to make.
Travel Itineraries for Autumnwear
Square neck pinafore dress in navy blue needlecord
Made as a gift. Details on total make time, adjustments and lessons learnt.
TOTAL TIME COMMITMENT: 34.5 hours including toile
Toile (without zip, lining, interior seam finishing, basting stitch removal or hemming): 12 hours
Cut out & transfer all pattern markings: 3 hours
Main construction: 12 hours
Lining construction, attachment and hemming: 4 hours (optional)
Finishings (hem, enclose zip): 3.5 hours (did a baby rolled hem by hand)
SEAM FINISHING & DECORATIVE EXTRAS
Add a lining to the skirt part only
All interior seams – overlock
Attach bodice facing to rest of garment – stitch-in-the-ditch
VERDICT & LESSONS LEARNT
THIS PATTERN IS FANTASTIC! I removed the lower tier to make this a midi dress and this feels so current. The tiers and gathering are also gorgeously generous – makes the garment feel really luxurious.
Needlecord is pretty dreamy to sew, but remember that there is a slight nap when cutting
I used a baby rolled hem with a hand finish and I think it is a beautiful way to finish fine needlecord and one I will use again – adds a really gorgeous touch to an otherwise quite utilitarian fabric.
Quality needlecord can look and feel like velvet – my Mum thought it was velvet when she first saw it.
Corduroy doesn’t necessarily need lining, but the interior is a lightly brushed cotton which can rub and catch on things like tights so better to line it for an autumn/winter garment.
I overlocked the acetate/rayon lining but I didn’t particularly like the finish – made it quite wibbly. Either need to choose a different technique to finish the raw edge or maybe expand the width of the overlock??
VARIATION IDEAS FOR ANOTHER MAKE
For summer, make a version in a mid- or light-wash denim
Add a contrasting topstitch around the neckline, hem and frill edges??