Puff-sleeve midi dress in khaki green linen-cotton twill from 1970’s pattern
Fourth make with this pattern, following several refinements on fit and pattern instructions.
TOTAL TIME COMMITMENT: 20 hours
Toile (without zip, lining, interior seam finishing, basting stitch removal or hemming): none
Cut out & transfer all pattern markings: 3 hours
Main construction: 11 hours
Lining construction, attachment and hemming: none
Finishings (hem, enclose zip): 2.5 hours
Applying studs: 2.5 hours
Fabric type
Cotton-linen twill
Fabric weight
estimate 250-300gsm
ADDITIONAL SEAM FINISHING, CONSTRUCTION NOTES & EXTRAS
Overlock each edge of skirt pattern piece before construction, press open
Overlock raw edges together at gathered tier seam
Overlock raw edges separately before construction on zip seam
Attach bodice facing to rest of garment using stitch-in-the-ditch
VERDICT & LESSONS LEARNT
For a centred zip, I must not sew the whole thing around in one continuous line - this is what made the top of the zip and the seam go out of alignment
Travel itineraries for Autumnwear
A spring coat in moss green cotton-linen twill from 1960’s Simplicity 5984 pattern
There’s an absense of outerwear for spring that actually offers warmth but isn’t made from wool. My journal on making my first fully lined spring coat, with cotton flannel interlining for warmth.
TOTAL TIME COMMITMENT: 28 hours including toile
Toile (without buttons, lining, interior seam finishing, basting stitch removal or hemming): 5 hours
Cut out & transfer all pattern markings (both main fabric, facing and lining): 5 hours
Main construction: 11.5 hours
Lining construction: 1.5 hours
Finishings (buttons, button holes, hem): 5 hours
FIT ADJUSTMENTS
Tapered the shoulder seam at a slightly more sloping angle for a better fit at my (sloped) shoulder
SEAM FINISHING
No real seam finishing needed - lined garment
Attach collar neck edge to each other – stitch-in-the-ditch by hand
DECORATIVE EXTRAS & CHOICES
Contrast fabric for the pleat underlay, the facings and the button holes
Contrast colour for the topstitch thread
Omit topstitching at the collar and omit topstitching around the button holes
VERDICT & LESSONS LEARNT
The fit and length on this coat (the shorter version) is superb – just a very small bit of extra sloping at the shoulders was needed to tailor the fit perfectly to my frame.
I absolutely love this fabric – makes such a beautiful jacket with both structure and drape, and very very easy to sew.
I can now make bound button holes! Uncorded, but still – found a technique that works reliably. There are two key things to remember: 1. When cutting, make the side triangles as big as they can be 2. Sew the triangles to the buttonhole fabric in the same colour as the fabric, to prevent it being seeing through the underside of the buttonholes
I can also topstitch much better! I used Gutermann topstitch thread on top with a 90 topstitch needle, and regular all-purpose thread in the bobbin, and I found a stitch length of about 3 to be ideal – worked well!
VARIATION IDEAS
Make in blue and orange Ventile with taped hems and ribbed cuffs, for a more waterproof version
Make a version in a light colour with a dark topstitch
Other Sewing Projects from Vintage Patterns
High-waisted trousers in linen-rayon blend
Working with a 1970’s Vogue Basic Design pattern, sewing a pair of single pleated trousers in loosely-woven rayon.
TOTAL TIME COMMITMENT: 25.5 hours including toile (note these trousers have been interlined)
Toile (without zip, buttons, lining, interior seam finishing, basting stitch removal or hemming): 12 hours
Cut out & transfer all pattern markings (both main fabric and interlining): 3 hours
Main construction: 9 hours
Lining construction: none
Finishings (hooks, hem): 1.5 hours
SEAM FINISHING & DECORATIVE EXTRAS
Outside leg seams – overlock together
Inside leg seams – overlock together
Pocket bags – overlock together
Crotch – overlock each side separately
Attach waistband - stitch-in-the-ditch
VERDICT & LESSONS LEARNT
This fabric was surprisingly difficult to work with, and very very wandering when cutting. I think it was the open weave. On the upside, it has made the most gorgeous pair of trousers – a lovely fabric for a fluid and classy drape
Interlining in the same fabric feels like a great idea! Added weight and depth to the trousers, without having to figure out a lining, or how a lining might change the garment drape. I would do this again, definitely
WAISTBAND THOUGHTS!!
For the first time, I didn’t fold the waistband exactly in half lengthways as the instructions tell you to, but just a little less than half on the outer side of the waistband, and a little more on the half that faces inside. This meant that the turned up edge on the inside easily covered the waistband seam and raw edges, and I could easily stitch-in-the-ditch on the outside without fear of not quite catching everything on the inside. This worked really well – I should do this on every waistband with similar instructions
This is the second made-to-measure garment where I have ended up with the waistband being too big by the end. I am not sure why this is – is it because the fabric has stretched slightly? Have I sewn a slightly smaller seam allowance? Due to the fabric wandering under the scissors, did I cut it too big in the first place? Not sure, but I have thought of three options to ensure a correctly sized waistband by the end:
Measure and draw out the waistband on the wrong size of the fabric with tailors chalk before sewing
Ignore the instructions and wait to sew the back darts until just before fitting the waistband; similarly, do not backstitch the side seams near the waistband so that I can unpick more easily if I need to take it in there later
Baste the waistband to the trousers before final stitching to check the fit
I sewed the belt loops in the wrong place, which also didn’t help with the waistband fit as it started to dictate the waistband placement – in the future, I need to ignore the instructions to follow the above steps first before applying the belt loops
Other Trouser Sewing projects
A drop-waist skirt from 1990’s Style 4987 pattern
Making a drop-waist skirt for a petite frame with high waist-to-hip ratio. Lessons learnt.
TOTAL TIME COMMITMENT: 28 hours including toile (note this skirt is unlined)
Toile (with buttons but no lining, interior seam finishing, basting stitch removal or hemming): 12 hours
Cut out & transfer all pattern markings: 2 hours
Main construction: 8 hours
Lining construction: none
Finishings (buttons, hem): 6 hours
SEAM FINISHING & DECORATIVE EXTRAS
Front to back skirt seam – French seam
Narrow double hem
Handworked buttonholes
VERDICT & LESSONS LEARNT
I have a high waist-to-hip ratio with a generous booty. Drop-waist skirts are not typically something I can buy ready-made so what a dream to be abl to make one for myself. I love the final product.
I also learned how to handwork button holes on this project and I’m so glad – this opens up many many more garment-making opportunities now, and it is something I have been putting off learning and the result is that I have shied away from some patterns.
This fabric I chose is a beautiful thing, and the resulting finished skirt is bold, dramatic, and holds its shape well. However, it is medium to heavy weight, and sewing several layers together means that some seams were both difficult to sew and a bit bulky in the end. In addition, the sturdiness of this fabric could also possibly accommodate a slightly more snug fit, as it won’t be stressed in the same way as a more delicate one would.
There are two interior seams that I had to leave raw as I couldn’t work out any better ways to finish them. One, I pinked; the other I left completely raw. I don’t think this skirt should have a lining so figuring out a neater way to finish the interior will take some thought.
I graded between size 14 and size 16 between the waist and hip line but the fit is still not absolutely perfect. I still find the waist is a little big and for some reason still unknown to me, I found that the yoke was too big for the waistband and had to sew the side seams again to a slightly smaller size before attaching the waistband. Perhaps next time I make this, I should just make the size 14.
I also learnt a little struggling to ease the fullness of the circle skirt into the bottom of the yoke – the pattern piece that needs easing can use a slightly smaller seam allowance and when sewing, I should always sew from the side of the fuller piece to control and prevent puckering.
My machine seemed to really struggle with the tension of the top stitching thread. It always seems the top thread was too loose with lots of loops showing on the underside. The topstitching thread gives great sheen but I might try the upholstery thread next time, see if my machine can handle it better
VARIATION IDEAS
I would like to try it again in a much more lightweight fabric (perhaps even a slightly sheer in a double layer?)