Pleated blouse in wool flannel from 1970’s Gunne Sax pattern
After some significant design amendments, made a cropped blouse in micro-houndstooth wool flannel. Lessons learnt.
TOTAL TIME COMMITMENT: 19 hours including toile
Toile (without buttons, lining, interior seam finishing, basting stitch removal or hemming) and pattern amends: 7 hours
Cut out & transfer all pattern markings: 1.5 hours
Main construction: 8.5 hours
Lining construction: none
Finishings (buttons, hem): 2 hours
Fabric type
Wool flannel
Fabric weight
estimate 170gsm
VERDICT & LESSONS LEARNT
Size 11 Junior is an excellent starting size for me – I had to make hardly any adjustments to the neck, chest & shoulder (the usual places I need to adjust). The only thing I needed to do was lower the bottom of the armhole, and shorten the bodice by 1 inch. This pattern already had plenty of room at the bust due to the pleats, and plenty of room at the bicep because of the full sleeve. Had this been more fitted in those areas, doubtless I could have also had to do a full bust and fuller bicep adjustment, but the fit across the back, shoulders and chest is particularly nice.
I also adjusted the placement of the stitching across the pleats, raising them up to be more flattering on my petite frame, and also so that they were not so close to the bust area which caused the fabric to pouch out over my full bust, making me look disproportionately large there.
BUTTON HOLES NEED TO BE VERTICAL ON BLOUSES EXCEPT AT THE COLLAR!! I did them horizontally on this, and they extend beyond the edge of the placket, which I will have to live with, but feel a bit daft since they really should be vertical. It did also occur to me that if a blouse pattern has a defined placket, this determines the max size of button I can use.
Also, I need to remember that my choice of interfacing for anywhere there is going to be buttonholes, is really important. I need to choose a facing that will blend in effortlessly when the buttonholes are cut. I used a white interfacing on this, but because it is a darker fashion fabric, you can see little tufts of white where I have cut for the buttonholes. Not a disaster, but would have been so much better to have used a black interfacing.
This is the heaviest fabric I could use for this design I think, and as a matter of fact, it could look much much better on me in a super lightweight fabric like cotton batiste or crepe-de-chine. Made up, wearing it feels a tiny bit like wearing a jacket, so nice and substantial, but I think I would prefer it in a lighter weight fabric. This fabric would be better suited to a trouser or skirt I think.
I learnt a lot about proportioning a loose fit blouse on my petite frame – when there is quite a bit of extra fabric across the front, I need to be very careful and really, these look best on me as cropped blouses, as I ended up doing with this pattern.
Very pleased to find a use for the decorative stitching, but I didn’t do this in a contrasting thread, so it can hardly be seen on the finished blouse.
VARIATION IDEAS FOR ANOTHER MAKE
Make it in a much more lightweight fabric, perhaps sheer as in the sewing pattern photo.
Make the collar, button placket and cuff with a decorative scalloped edge (pattern pieces drafted)
Or make the collar and cuff inserting a piping or lace trim in a contrast colour to define the edge – this will work beautifully well if the main blouse is made in a plain fabric
Travel itineraries for Autumnwear
A tent dress in Liberty crepe-de-chine from Very Easy Vogue 8593
Reflections on the first time working with silk. Main lesson: crepe-de-chine is difficult to cut out…
TOTAL TIME COMMITMENT: 16 hours
Cut out & transfer all pattern markings: 3.5 hours
Main construction: 7.5 hours
Lining construction: none
Finishings (buttons, hem): 5 hours
ADDITIONAL SEAM FINISHING, CONSTRUCTION NOTES & EXTRAS
Interior seams - stitch-and-pink
No buttonholes (didn’t want to risk it on the crepe-de-chine!) Went with faux buttons, with press-studs underneath.
VERDICT & LESSONS LEARNT
This was one of those ‘scary projects’ for me. My first attempt using crepe-de-chine and it was a gift to boot, so the fear about getting it wrong felt real enough to put me off getting it made for a long time - too long. The trigger was reading this great article from Closet Core Patterns, which really cut through and reminded me that I won’t learn anything unless I just get on with it.
What greatly helped, was using a pattern that a. I know I love, b. I know fits me, and c. is quite a simple design. I think it could have gone poorly if I’d attempted to make something in this more difficult fabric whilst also grappling with a new or more challenging pattern. I set myself up with success being a strong possibility.
My main learning was the application of crepe-de-chine needs considering, and some design elements need changing when using it. For example, I don’t think garments made from crepe-de-chine should have pockets. Part of the appeal in this fabric is its featherlightness when wearing, and when you have a pocket, you put something in it….weighing down that airy fluidity you (probably paid so much) to wear. So, the lesson for me is: if I’m intending to make something from crepe-de-chine, skip any pockets on the pattern.
I actually found the cutting out, not the sewing, to be the most challenging aspect of using this fabric. I don’t own a cutting mat or rotary cutter, so it was good old fashioned pins and scissors and this fabric definitely shrinks away from the scissors very readily. While the sewing wasn’t dreamy, it being a matte fabric, it was actually fairly grippy and steady under the machine, more than I expected it to be.
Last learning point was the stitch-and-pink method for finishing interior seams works a treat. OK, not necessarily the sort of finish you get on designer or ready-to-wear, but straight-foward to sew, reliable, and crucially adds no bulk. Its a finish I will use again on this fabric.
In terms of the result, I. Am. Thrilled. I feel like a flipping goddess wearing this garment, and it’s turned out to be a compliment-fetcher too. It’s the epitome of effortless chic, and has me wafting about with the air of a woman who knows what she’s about.
Travel Itineraries for Summerwear
A scoop neck tiered sundress from a 1970’s Butterick 7012 pattern
Going off-piste, using quilting cotton for a simple summer tiered dress with topstitching.
TOTAL TIME COMMITMENT: 7.5 hours
Cut out & transfer all pattern markings: 1.5 hours
Main construction: 5.5 hours
Lining construction, attachment and hemming: none
Finishings (hem): 0.5 hours
PATTERN CHANGES
None
SEAM FINISHING & DECORATIVE EXTRAS
Vertical interior seams – overlock
Raw edges at gathered seam - overlock
Attach bodice facing to rest of garment – stitch-in-the-ditch
VERDICT & LESSONS LEARNT
Very very very simple to make. There are hardly any fit devices on this garment (which also means its not very figure-showing either) and there is no closure - it pulls over the head - so it is very easy to knock togther. This looseness of fit makes it ideal for a very very hot day, or as a cover up over a bikini, both of which I have used it for and its ideal.
I absolutely love the Painters Palette solids quilting fabric as an option for dressmaking. It’s so very easy to sew with, and is ‘substantial’ cotton fabric that is not sheer at all. It seems very hard to find a similar weight cotton in true dress-making fabric.
Did a ‘quick and dirty’ Full-Bust-Adjustment on this bodice, that doesn’t have any darts, by simply lengthening the bodice front and back, then adding two darts. Result is not bad, though darts feel like they are in the wrong place.
VARIATION IDEAS FOR ANOTHER MAKE
I would like the gathering to be more generous than it is – would like to widen each of the tiers to get more gathering into each one
Make in a viscose crepe or a crepe-back satin. The result will be more drapey and the loose fit means seams won’t get stressed.
Other Sewing Projects in Cotton
A loose-fitting tent dress with dagger collar
Working from a 1970’s Style pattern, turning craft cotton to the job of dressmaking - here’s how I got on. Main lesson: oversized is still a fit….
TOTAL TIME COMMITMENT: 18.5 hours including toile (note this dress is unlined)
Toile (without buttons, lining, interior seam finishing, basting stitch removal or hemming): 7 hours
Cut out & transfer all pattern markings: 2.5 hours
Main construction: 5.5 hours
Lining construction: none
Finishings (buttons, hem): 3.5 hours
SEAM FINISHING & DECORATIVE EXTRAS
Around all raw edges – overlock
Handworked buttonholes
VERDICT & LESSONS LEARNT
Oversized is still a fit – while I might not need the kinds of amends that make a garment fit closely to my body, I still need to pay attention to things like dart placement and length, size of armscye, position of shoulder seam etc. If anything, the precision of these details is what makes it look purposefully oversized, and not just a baggy shapeless mess. More so than with fitted garments, I also found myself considering how elements like proportion, fabric drape and hem depth contributed to the overall visual and ensuring that these design aspects offered balance, purpose and structure to the oversized fit. Overall, I loved fitting this oversized garment; it was such an enjoyable experience where I could try out some pattern adjustment techniques and exercise my ‘design eye’ at the same time.
I adore this pattern and the finished garment. As a petite, oversized is a very tricky thing for me to buy ready-made – they tend to swamp me as they aren’t proportionate for petiteness - and has led me to believe it doesn’t suit me but this project has disabused me of that notion. Being able to proportion the oversized-ness for me personally, I now have a garment that suits me well.
I don’t like the instructions for the interfacing on the inside of the button placket, but haven’t figured out a better option.
VARIATION IDEAS FOR ANOTHER MAKE
Use the facings as a guide to make a version with a cutout back
Make this in a liquid, drapey silk (Crepe-back satin silk?! Dare I?!) with smaller buttons up the front
Eliminate some of the fullness in the skirt, turn the side seams into slits, and make it into a long tunic for a co-ord set with a matching pair of wide-leg trousers
Make it a mini
Other Sewing Projects in Cotton
A cropped jacket in cotton twill from 1980’s New Look 6007 pattern
Using a 1980’s cropped suit jacket pattern as the starting point. Details on total make time, adjustments, seam finishes, and lessons learnt.
TOTAL TIME COMMITMENT: 16 hours including toile (note this jacket is self-lined in the same fabric)
Toile (without buttons, lining, interior seam finishing, basting stitch removal or hemming): 6.5 hours
Cut out & transfer all pattern markings (both main fabric and facing): 2.5 hours
Main construction: 7 hours
Lining construction: none
Finishings (buttons, button holes, hem): none
PATTERN CHANGES
I added a waistband and cuffs – attach to the outermost layer, fold to the inside then stitch-in-the-ditch from the outside
Since I didn’t want to make this with shoulder pads (which the shoulder is designed for) but still wanted a ‘slouchy’ ovesized shoulder fit, I reduced the shoulder length by 2.5cm at shoulder head, grading down the armscye by 15cm
Since this pattern has no lining, I chose to self-line the bodice by simply cutting extra pieces of the main bodice, and applying them in reverse. This very neatly hides all the interior raw edges
SEAM FINISHING & DECORATIVE EXTRAS
Armscye – overlock together
VERDICT & LESSONS LEARNT
This is a fantastic loose fit on me, and is excellent without the buttons. It’s a brilliant summer jacket option in the cotton twill fabric – serves all the same purposes as a denim jacket but a bit different.
These sleeves were incredibly difficult to set in, but I managed it without a single pucker. I took a very long time gathering and pinning in place before sewing, then sewed from the side of the gathers to control that better. The extra careful effort was worth the smooth result.
One thing to note on fit, is that I still think the arms are a little too long for me, which is disappointing for a made-to-measure, and I think it is because when ‘sizing them up’ before sewing, I hadn’t pressed the cuffs down, so they were a little ‘springer’ and higher before sewing and pressing.
I think the cuffs and waistband I added were GENIUS – they really finish this jacket off for me, much more in-keeping with my style at the moment
VARIATION IDEAS
Add just two buttons at the waistband, double-breasted style single row of buttons