A-line skirt in bright red serge wool twill
Using a 1990’s pattern, details on total make time, adjustments and seam finishes, and lessons learnt.
TOTAL TIME COMMITMENT: 6 hours
Toile (with buttons but no lining, interior seam finishing, basting stitch removal or hemming): none
Cut out & transfer all pattern markings: 1 hour
Main construction: 4.5 hours
Lining construction: none
Finishings (hooks, hem): 1.5 hour
ADDITIONAL SEAM FINISHING & DECORATIVE EXTRAS
Each side of the seam allowance was overlocked before stitching
Went with an overlock with single fold hem because I attempted a blind hem, but it didn’t take all the way round, and I didn’t want to unpick it and potentially ruin the overlocking so just stitched it
VERDICT & LESSONS LEARNT
Attached the zip too high up on the centre back seam – have to draw this over my head.
This was an INCREDIBLY easy skirt to sew together and I absolutely love this, what I am calling ‘trench-weight’ wool. It is so smooth, so drapey, great handle, and yet still has a touch of structure. Been wearing it in London today actually and not found it very creasy at all. Looks amazing with my Jaeger navy wool trench which is in a similar fabric.
Other 1990’s Sewing Projects
Man’s shirt in grey wool flannel from Simplicity 8753
Fine wool flannel, from a modern Simplicity pattern. Beautiful shirting fabric, even though few use it this way.
TOTAL TIME COMMITMENT: 18.5 hours (including toile)
Toile (without zip, buttons, lining, interior seam finishing, basting stitch removal or hemming): 7 hours
Cut out & transfer all pattern markings (both main fabric and interlining): 2.5 hours
Main construction: 5.5 hours
Lining construction: none
Finishings (hooks, hem): 3.5 hours
PATTERN CHANGES
None
SEAM FINISHING & DECORATIVE EXTRAS
Topstitch with regular thread & 2.8mm stitch length – lovely, very subtle
Rounded buttonhole – correct choice for fine/medium fabric
VERDICT & LESSONS LEARNT
I adored sewing with this fabric. And it finished up a dream. Will make myself a shirt in wool flannel, for certain.
Flat-felling the seams was easier than I expected and makes a very (unsurprisingly) flat finish on the inside, which I expect enhances the wear experience.
I couldn’t have been prouder of myself of my edgestiching on this make. On point. I’m improving.
Learnt a lot about buttonholing on this project. While certainly less effort than handbound buttonholes, doing them on the machine is not the most straight-forward task, and they can very easily go askew if you are just a tad too assertive when feeding the fabric through the machine.
I don’t like the instructions for the interfacing on the inside of the button placket, but haven’t figured out a better option.
Button-up box-pleat skirt from McCalls 7906
Lessons learnt from making a box-pleated midi skirt, in a midweight twill, using a Y2K pattern.
TOTAL TIME COMMITMENT: 8 hours
Toile: 3 hours
Cut out & transfer all pattern markings: 2 hours
Main construction: 7.5 hours
Lining construction: none
Finishings (hem): 4.5 hours
ADDITIONAL SEAM FINISHING & DECORATIVE EXTRAS
Overlocked each side of the side seam before stitching
Used a triple stitch for the deep hem, instead of changing to a topstitch thread
Rounded buttonholes
VERDICT & LESSONS LEARNT
I do not like this fabric – too bright, too stiff. I will not wear this skirt.
Also, the fabric is waaaaay too heavy for this amount of box pleating. The area at the waist is particularly bulky and the facing has a tendency to roll outwards. The unusual thing here is that the suggested fabrics are Sateen, Chino, Cotton Blends and Twill. For me, this skirt must be made in a lightweight fabric such as poplin, shirting or lawn.
For all this box pleating and bulkiness, I don’t need pockets; adds too much bulk at the hip area.
Other Skirt Sewing projects
A-line skirt in electric blue cotton twill from Vogue 7210
Midi skirt with contour waistband, using a Y2K Style pattern. Experimenting with a robust and stiff fabric for this design.
TOTAL TIME COMMITMENT: 8 hours
Toile: 3 hours
Cut out & transfer all pattern markings: 1 hour
Main construction: 2.5 hours
Lining construction: none
Finishings (hem): 1.5 hours
ADDITIONAL SEAM FINISHING & DECORATIVE EXTRAS
Each side of the seam allowance was overlocked before stitching
VERDICT & LESSONS LEARNT
A very easy thing to make but do not like this fabric – too bright, too stiff. Will not wear this skirt
Not a bad fit but could need a few tweaks for different fabrics as it sits just a tad low on my waist.
For a sturdier fabric might be better to taper the waist a little without changing the hips
For a finer or more delicate fabric, this is the correct fit
Princess seamed dress with short puff-sleeves from 1980’s Style 4603 pattern
First time sewing princess seams, first time sewing with proper shirting fabric.
TOTAL TIME COMMITMENT: 37 hours including toile
Toile & pattern fitting: 15 hours
Cut out & transfer all pattern markings: 2 hours
Main construction: 9.5 hours
Lining construction, attachment and hemming: none
Finishings (attach buttons, make button holes, hem sleeve and hem skirt): 9.5 hours
PATTERN CHANGES
Deepened the scoop neckline
Changed the patch pockets to pockets concealed in the front skirt seams
SEAM FINISHING & DECORATIVE EXTRAS
Princess seams on bodice – overlock together
Armscye & attach skirt to bodice – overlock together
Skirt seams – overlock together
Shoulder seam – Overlock each side separately
Sleeve seam – Overlock each side separately
Facing edge – bias bind raw edge
Topstitch sleeve hem
Handworked buttonholes
VERDICT & LESSONS LEARNT
This is my first princess-seamed garment, and I spent a loooooong time analysing the fit on the toile, pinching out excess and transferring the adjustments to the paper pattern. In the end, this amounted to removing some excess both just above and just below the waist to account for my hollows, a slight decrease in the shoulder width, and a slight tapering in at the underarm. This is probably the very first garment I have made so many fit adjustments to, and even though this process took quite a while, and the adjustments were really quite small, I am thrilled with the result. It fits me so well, especially around the shoulder and bustline, and hence, looks so lovely on me.
I liked working with the shirting fabric. The Panama weave is quite a loose airy weave, and I find the resulting fabric has that kind of floppy lived-in chic of linen, perfectly suited for wearing on a warm summer’s day.
Other Dress Sewing Projects
A floral needlecord dress from 1970’s Style 1169 pattern
Third make with this pattern, following several refinements on fit and pattern instructions.
TOTAL TIME COMMITMENT: 17.5 hours
Cut out & transfer all pattern markings: 3 hours
Main construction: 12 hours
Lining construction: none
Finishings (buttons, hem): 2.5 hours
ADDITIONAL SEAM FINISHING, CONSTRUCTION NOTES & EXTRAS
Vertical interior seams – overlock
Raw edges on zip seam – overlock each side separately
Raw edges at gathered seam - overlock
Attach bodice facing to rest of garment – stitch-in-the-ditch
VERDICT & LESSONS LEARNT
This fine needlecord is surprising substantial, offering a slight bit of warmth for a Northern European spring summer. The length and amount of fabric also contributes to this, making it something I can wear more readily in England, for our temperate climate.
Travel itineraries for Springwear
Cotton lawn dress from Givenchy 1970’s Vogue Paris Original 1950 pattern
Shortening a 1970’s Givenchy pattern I have worked with before, turning midi into mini, my journal on making this dress in Pima cotton lawn in a busy print.
TOTAL TIME COMMITMENT: 20.5 hours
Cut out & transfer all pattern markings: 5 hours
Main construction: 10 hours
Lining construction: none
Finishings (buttons, hem): 5.5 hours
ADDITIONAL SEAM FINISHING, CONSTRUCTION NOTES & EXTRAS
4x side seams, armscye & pocket bags – bias bind together
Pocket-to-dress seam – French seam
Underarm – French seam
Shoulder seam – bias bind each side separately
Sleeve seam – French seam
VERDICT & LESSONS LEARNT
I find this fabric a bit ‘busy’ for my liking though I can’t pinpoint why………..I also think it really needs to be made in a plain fabric to really see those beautiful released tucks down the bodice.
VARIATION IDEAS FOR ANOTHER MAKE
Add a collar, turning the original mandarin collar into a collar stand?
Make in teal single wool crepe
Turn the sleeve into a half sleeve
Sewing Other Springwear
A spring coat in moss green cotton-linen twill from 1960’s Simplicity 5984 pattern
There’s an absense of outerwear for spring that actually offers warmth but isn’t made from wool. My journal on making my first fully lined spring coat, with cotton flannel interlining for warmth.
TOTAL TIME COMMITMENT: 28 hours including toile
Toile (without buttons, lining, interior seam finishing, basting stitch removal or hemming): 5 hours
Cut out & transfer all pattern markings (both main fabric, facing and lining): 5 hours
Main construction: 11.5 hours
Lining construction: 1.5 hours
Finishings (buttons, button holes, hem): 5 hours
FIT ADJUSTMENTS
Tapered the shoulder seam at a slightly more sloping angle for a better fit at my (sloped) shoulder
SEAM FINISHING
No real seam finishing needed - lined garment
Attach collar neck edge to each other – stitch-in-the-ditch by hand
DECORATIVE EXTRAS & CHOICES
Contrast fabric for the pleat underlay, the facings and the button holes
Contrast colour for the topstitch thread
Omit topstitching at the collar and omit topstitching around the button holes
VERDICT & LESSONS LEARNT
The fit and length on this coat (the shorter version) is superb – just a very small bit of extra sloping at the shoulders was needed to tailor the fit perfectly to my frame.
I absolutely love this fabric – makes such a beautiful jacket with both structure and drape, and very very easy to sew.
I can now make bound button holes! Uncorded, but still – found a technique that works reliably. There are two key things to remember: 1. When cutting, make the side triangles as big as they can be 2. Sew the triangles to the buttonhole fabric in the same colour as the fabric, to prevent it being seeing through the underside of the buttonholes
I can also topstitch much better! I used Gutermann topstitch thread on top with a 90 topstitch needle, and regular all-purpose thread in the bobbin, and I found a stitch length of about 3 to be ideal – worked well!
VARIATION IDEAS
Make in blue and orange Ventile with taped hems and ribbed cuffs, for a more waterproof version
Make a version in a light colour with a dark topstitch
Other Sewing Projects from Vintage Patterns
An A-line skirt in Designer’s Guild cotton duck
Experimenting with Designer’s Guild upholstery fabric………..I asked myself: ”how well can cotton duck be applied to dressmaking?”……..what I learnt
TOTAL TIME COMMITMENT: 10 hours
Toile: none
Cut out & transfer all pattern markings: 1 hour
Main construction: 6 hours
Lining construction: none
Finishings (hem): 3 hours
ADDITIONAL SEAM FINISHING & DECORATIVE EXTRAS
Added 4 rows of topstitching to each vertical seam on the skirt, mainly as a way to enclose the raw edges on the inside
Bias-bound hem
Bias-bound pocket bags
VERDICT & LESSONS LEARNT
I do not like the final product – fabric is easy to sew, but it’s far too stiff to wear.
Still not managing to fit the waistband correctly – this has turned out too big again at 30”. Need a better technique for fitting the waistband to ensure the finished garment is a perfect fit on me.
VARIATION IDEAS
I would like to try it again in a much more lightweight fabric (perhaps even a slightly sheer in a double layer?)
Other Skirt Sewing Projects
High-waisted trousers in sage green twill from a 1970’s Vogue 1275 pattern
Journal of my total make time, lessons learnt and pattern adjustments.
TOTAL TIME COMMITMENT: 9 hours
Toile (without zip, buttons, lining, interior seam finishing, basting stitch removal or hemming): none
Cut out & transfer all pattern markings (both main fabric and interlining): 1 hour
Main construction: 6 hours
Lining construction: none
Finishings (hem): 2 hours
PATTERN CHANGES
Added a little extra flare from the hip down to the hem
Cut the waistband so that the gap and zip is located in the centre back rather than centre front
Add a cuff at the trouser hem
Removed pockets
SEAM FINISHING & DECORATIVE EXTRAS
Outside leg seams – overlock together
Inside leg seams – overlock together
Crotch – overlock each side separately
VERDICT & LESSONS LEARNT
These are great! Turning the waistband around, removing the pockets and adding more flare has made a big enough difference to the finished result that it feels like a very different pair of trousers from my caramel linens.
The cotton twill is a great application for this kind of garment – there is some drape in this fabric so it feels soft and moves nicely, but it also has some structure which adds drama to the flare and is handy in a trouser. I also absolutely had no need to line them.
They also felt very quick and easy to make.
Travel Itineraries for Autumnwear
Square neck pinafore dress in navy blue needlecord
Made as a gift. Details on total make time, adjustments and lessons learnt.
TOTAL TIME COMMITMENT: 34.5 hours including toile
Toile (without zip, lining, interior seam finishing, basting stitch removal or hemming): 12 hours
Cut out & transfer all pattern markings: 3 hours
Main construction: 12 hours
Lining construction, attachment and hemming: 4 hours (optional)
Finishings (hem, enclose zip): 3.5 hours (did a baby rolled hem by hand)
SEAM FINISHING & DECORATIVE EXTRAS
Add a lining to the skirt part only
All interior seams – overlock
Attach bodice facing to rest of garment – stitch-in-the-ditch
VERDICT & LESSONS LEARNT
THIS PATTERN IS FANTASTIC! I removed the lower tier to make this a midi dress and this feels so current. The tiers and gathering are also gorgeously generous – makes the garment feel really luxurious.
Needlecord is pretty dreamy to sew, but remember that there is a slight nap when cutting
I used a baby rolled hem with a hand finish and I think it is a beautiful way to finish fine needlecord and one I will use again – adds a really gorgeous touch to an otherwise quite utilitarian fabric.
Quality needlecord can look and feel like velvet – my Mum thought it was velvet when she first saw it.
Corduroy doesn’t necessarily need lining, but the interior is a lightly brushed cotton which can rub and catch on things like tights so better to line it for an autumn/winter garment.
I overlocked the acetate/rayon lining but I didn’t particularly like the finish – made it quite wibbly. Either need to choose a different technique to finish the raw edge or maybe expand the width of the overlock??
VARIATION IDEAS FOR ANOTHER MAKE
For summer, make a version in a mid- or light-wash denim
Add a contrasting topstitch around the neckline, hem and frill edges??
A cropped jacket in cotton twill from 1980’s New Look 6007 pattern
Using a 1980’s cropped suit jacket pattern as the starting point. Details on total make time, adjustments, seam finishes, and lessons learnt.
TOTAL TIME COMMITMENT: 16 hours including toile (note this jacket is self-lined in the same fabric)
Toile (without buttons, lining, interior seam finishing, basting stitch removal or hemming): 6.5 hours
Cut out & transfer all pattern markings (both main fabric and facing): 2.5 hours
Main construction: 7 hours
Lining construction: none
Finishings (buttons, button holes, hem): none
PATTERN CHANGES
I added a waistband and cuffs – attach to the outermost layer, fold to the inside then stitch-in-the-ditch from the outside
Since I didn’t want to make this with shoulder pads (which the shoulder is designed for) but still wanted a ‘slouchy’ ovesized shoulder fit, I reduced the shoulder length by 2.5cm at shoulder head, grading down the armscye by 15cm
Since this pattern has no lining, I chose to self-line the bodice by simply cutting extra pieces of the main bodice, and applying them in reverse. This very neatly hides all the interior raw edges
SEAM FINISHING & DECORATIVE EXTRAS
Armscye – overlock together
VERDICT & LESSONS LEARNT
This is a fantastic loose fit on me, and is excellent without the buttons. It’s a brilliant summer jacket option in the cotton twill fabric – serves all the same purposes as a denim jacket but a bit different.
These sleeves were incredibly difficult to set in, but I managed it without a single pucker. I took a very long time gathering and pinning in place before sewing, then sewed from the side of the gathers to control that better. The extra careful effort was worth the smooth result.
One thing to note on fit, is that I still think the arms are a little too long for me, which is disappointing for a made-to-measure, and I think it is because when ‘sizing them up’ before sewing, I hadn’t pressed the cuffs down, so they were a little ‘springer’ and higher before sewing and pressing.
I think the cuffs and waistband I added were GENIUS – they really finish this jacket off for me, much more in-keeping with my style at the moment
VARIATION IDEAS
Add just two buttons at the waistband, double-breasted style single row of buttons
More 1980’s style
High-waisted trousers in linen-rayon blend
Working with a 1970’s Vogue Basic Design pattern, sewing a pair of single pleated trousers in loosely-woven rayon.
TOTAL TIME COMMITMENT: 25.5 hours including toile (note these trousers have been interlined)
Toile (without zip, buttons, lining, interior seam finishing, basting stitch removal or hemming): 12 hours
Cut out & transfer all pattern markings (both main fabric and interlining): 3 hours
Main construction: 9 hours
Lining construction: none
Finishings (hooks, hem): 1.5 hours
SEAM FINISHING & DECORATIVE EXTRAS
Outside leg seams – overlock together
Inside leg seams – overlock together
Pocket bags – overlock together
Crotch – overlock each side separately
Attach waistband - stitch-in-the-ditch
VERDICT & LESSONS LEARNT
This fabric was surprisingly difficult to work with, and very very wandering when cutting. I think it was the open weave. On the upside, it has made the most gorgeous pair of trousers – a lovely fabric for a fluid and classy drape
Interlining in the same fabric feels like a great idea! Added weight and depth to the trousers, without having to figure out a lining, or how a lining might change the garment drape. I would do this again, definitely
WAISTBAND THOUGHTS!!
For the first time, I didn’t fold the waistband exactly in half lengthways as the instructions tell you to, but just a little less than half on the outer side of the waistband, and a little more on the half that faces inside. This meant that the turned up edge on the inside easily covered the waistband seam and raw edges, and I could easily stitch-in-the-ditch on the outside without fear of not quite catching everything on the inside. This worked really well – I should do this on every waistband with similar instructions
This is the second made-to-measure garment where I have ended up with the waistband being too big by the end. I am not sure why this is – is it because the fabric has stretched slightly? Have I sewn a slightly smaller seam allowance? Due to the fabric wandering under the scissors, did I cut it too big in the first place? Not sure, but I have thought of three options to ensure a correctly sized waistband by the end:
Measure and draw out the waistband on the wrong size of the fabric with tailors chalk before sewing
Ignore the instructions and wait to sew the back darts until just before fitting the waistband; similarly, do not backstitch the side seams near the waistband so that I can unpick more easily if I need to take it in there later
Baste the waistband to the trousers before final stitching to check the fit
I sewed the belt loops in the wrong place, which also didn’t help with the waistband fit as it started to dictate the waistband placement – in the future, I need to ignore the instructions to follow the above steps first before applying the belt loops
Other Trouser Sewing projects
A drop-waist skirt from 1990’s Style 4987 pattern
Making a drop-waist skirt for a petite frame with high waist-to-hip ratio. Lessons learnt.
TOTAL TIME COMMITMENT: 28 hours including toile (note this skirt is unlined)
Toile (with buttons but no lining, interior seam finishing, basting stitch removal or hemming): 12 hours
Cut out & transfer all pattern markings: 2 hours
Main construction: 8 hours
Lining construction: none
Finishings (buttons, hem): 6 hours
SEAM FINISHING & DECORATIVE EXTRAS
Front to back skirt seam – French seam
Narrow double hem
Handworked buttonholes
VERDICT & LESSONS LEARNT
I have a high waist-to-hip ratio with a generous booty. Drop-waist skirts are not typically something I can buy ready-made so what a dream to be abl to make one for myself. I love the final product.
I also learned how to handwork button holes on this project and I’m so glad – this opens up many many more garment-making opportunities now, and it is something I have been putting off learning and the result is that I have shied away from some patterns.
This fabric I chose is a beautiful thing, and the resulting finished skirt is bold, dramatic, and holds its shape well. However, it is medium to heavy weight, and sewing several layers together means that some seams were both difficult to sew and a bit bulky in the end. In addition, the sturdiness of this fabric could also possibly accommodate a slightly more snug fit, as it won’t be stressed in the same way as a more delicate one would.
There are two interior seams that I had to leave raw as I couldn’t work out any better ways to finish them. One, I pinked; the other I left completely raw. I don’t think this skirt should have a lining so figuring out a neater way to finish the interior will take some thought.
I graded between size 14 and size 16 between the waist and hip line but the fit is still not absolutely perfect. I still find the waist is a little big and for some reason still unknown to me, I found that the yoke was too big for the waistband and had to sew the side seams again to a slightly smaller size before attaching the waistband. Perhaps next time I make this, I should just make the size 14.
I also learnt a little struggling to ease the fullness of the circle skirt into the bottom of the yoke – the pattern piece that needs easing can use a slightly smaller seam allowance and when sewing, I should always sew from the side of the fuller piece to control and prevent puckering.
My machine seemed to really struggle with the tension of the top stitching thread. It always seems the top thread was too loose with lots of loops showing on the underside. The topstitching thread gives great sheen but I might try the upholstery thread next time, see if my machine can handle it better
VARIATION IDEAS
I would like to try it again in a much more lightweight fabric (perhaps even a slightly sheer in a double layer?)